MOULDING/CASTING

 KLEAN KLAY

  • The most popular oil based clay available. A softer type of plasticine clay with the advantage of not inhibiting the cure of flexible moulding compounds.

SUPER SCULPEY

  • This is a ceramic like sculpting compound that is shatter and chip resistant.

AVES APOXIE SCULPT

  • Apoxie Sculpt is a permanent, self hardening, two part modelling and repair compound.

ULTRASIL

  • Medium strength, condensation-curing, two component silicone rubber that cures at room temperature.

GELSIL

  • High strength, brush on, condensation-curing, two component silicone rubber that is pre-thickened and cures at room temperature.

PINKYSIL

  • Pourable, addition-curing, two component silicone rubber that cures at room temperature. Skin safe.

PLATSIL GEL-10

  • Prosthetic grade addition-curing, two component silicone rubber that cures at room temperature.

CLONE FX

  • Brushable, addition-curing, two component silicone rubber that cures at room temperature.Skin safe

EASYCAST

  • Machinable, can be sanded, drilled, and grounded. Can produce the most minute detail as a result of its extremely low viscosity.

PROCAST

  • Rapid setting and demonstrates more flexibility than other similar materials.

BQUEEN

  • Mainstay resin for the decorative jewellery industry.

EASYCAST CLEAR

  • Ideal for small parts such as lenses, model windows, prototypes and clear injection moulded like parts.

FLEXIBLE POLYURETHANES

F-SERIES

  • Great for shock absorbent bumpers, flexible model parts, and model of all kinds.

RESIN MOULDS

  • clear casting polyester can be poured. Simply place the tray on a level surface, spray a light film of release agent.

SILICONE MOULDS

  • Premade moulds for casting and creating beautiful custom made jewellery.

BRUSH LATEX

  • A moulding compound on pre-vulcanised natural rubber latex.

GELTEX LATEX THIKENER

  • Chemical to thicken latex up to brush grade.

HYDROSTONE TB

  • One of the hardest and strongest gymsum cements. Slightly higher setting expansion then hydrocal, but is ideal in case moulds.

DENTAL ALGINATE

  • High-precision material with a chromatic phase and set indicator. Easy to use, ultra-fast setting and excellent dimensional stability.

Z-POXY- 5 MIN FORMULA

  • Clear, equal mix that curses in less than 5 minutes. Fuel proof, vibration resistant formula.

Z-POXY- 30 MIN FORMULA

  • 30 minute system allows 15 minutes working time and then cures in 30 minutes.

Z-POXY- FINISHING RESIN

  • Equal mix, odourless formula. Cures in 6-8 hours at temperatures about 18 degrees.

METAL POWDERS

BRONZE POWDER

BRASS POWDER

COPPER POWDER

IRON POWDER

  • These fillers are commonly used in resins for producing cold cast metal effects.

PLASTER BANDAGE

  • Used to reinforce alginate for face moulds.